• Translate

    English Dutch Estonian Filipino Finnish French Georgian German Greek Hebrew Hindi Hungarian Icelandic Italian Japanese Korean Norwegian Polish Portuguese Russian Slovenian Spanish Swahili Swedish Thai Turkish Welsh Yiddish
Translate

Wednesday, Sep 27th

Last update05:51:11 AM GMT

Our Clientele

Coating Wires

  • PDF
Article Index
ALLOY 625 WIRE
BABBITT WIRE
MOLYBDENUM WIRE 99% PURITY
MONEL 400
NI-AL 95/5
PURE ZINC WIRE
SS 316L
SS 420
SS 80
SS440
SIL 8016(STAINLESS STEEL WIRE)
SS 440 WIRE
NI AL 80/20 WIRE
NiCrAl
NiAlMo
SYNCO ALCR3 WIRE
SYNCO S23 WIRE

ALLOY 625 WIRE

Alloy 625 is a non magnetic, corrosion and oxidation resistant, nickel based alloy.  Providing excellent corrosion resistance, wire spray coating can withstand many corrosive environments. It can sustain without almost any hard in alkaline, salt water, fresh water, neutral salts and even air and oxidizing environments.

BABBITT WIRE

Babbitt Wire of (70, 30)/ (80, 20) in 1.6mm/2mm is available with us. Automatic Wire Flame Spray Equipment is used to apply this coating. It is particularly suitable for coating on capacitors, resistors, panels etc. It produces dense coatings which are suitable for high speed and heavy duty bearings and bearing Reclamation.

MOLYBDENUM WIRE 99% PURITY

It is frequently used as a bond coat on parts such as Synchro Rings/industrial Gears/Clutch Parts etc. due to its very good bong strength between the surface of base metal and sprayed metal. Though molybdenum is a costly wire, the sprayed thickness required for excellent bonding is only 0.015". It has low friction characteristics and is wear resistant. It is available in 2mm and 3.17mm sizes.


MONEL 400

Some of the features of this wire are high strength and toughness from cryogenic temperatures to 1800 degrees F (980 degrees C), good oxidation resistance, exceptional fatigue strength, and good corrosion resistance. Its applications are found in chemical and pollution control equipment, ash pit seals, nuclear reactors, marine equipment, ducting, thrust reverser assemblies, fuel nozzles, afterburners and spray bars. It can also be used for providing excellent finishing on surfaces.

NI-AL 95/5

It is available in 1.6 mm and its salient features are, (a) Dimensional Restoration (b) Good Bond Strength (c) Oxidation and Abrasion Resistant (d) Self Bonding Material and (e) Excellent Bonding.

PURE ZINC WIRE

While providing steel protection against corrosion in aggressive atmospheric conditions, it also has higher electrical conductivity. It is available in 1.6mm and 3.12mm and can be sprayed using Synco Flame Spray System

SS 316L

This wire, (a) Produces corrosion resistant work, (b) Provides a hardenable finish, (c) Facilitates excellent machinability, (d) Helpful for dimensional restoration and (e) Provides good corrosion resistance.

SS 420

Coatings using this wire are highly wear resistant and show good corrosion resistance and anti-frictional qualities. These are available in 1/8” and 1, 6 mm and other diameter on request. Final machining is done by wet grinding

SS 80

High carbon steel for reclamation of machine element parts requiring hard surfaces. Finish by wet grinding Available in 1/8” and 1, 6 mm, other diameter on request.


SS440

The coatings are highly wear resistant and show very good corrosion resistance. This is recommended for applications that require good wear resistance and very good corrosion qualities. Composition: C Mn Si Cr Ni Mo Fe .44 <1 <117, 5 11, 2 bal

SIL 8016(STAINLESS STEEL WIRE)

This high carbon steel for reclamation of machine element parts requiring hard surfaces. Finish by wet grinding and available in 1/8” and 1, 6 mm and other diameter on request.

SS 440 WIRE

The coatings are highly wear resistant and show very good corrosion resistance. This is recommended for applications that require good wear resistance and very good corrosion qualities. Composition: C Mn Si Cr Ni Mo Fe .44 <1 <1 17, 5 1 1, 2 bal.

NI AL 80/20 WIRE

It produces coatings which resist corrosive gases and oxidation in temperatures up to 980 Deg C. It is also used as a bond coat for ceramic materials. The coatings, thus formed are machinable.

NiCrAl

Composition: Cr 20%, Al 7% and Ni Bal

Resistant to Oxidation and corrosion at high temperature. Undercoat for ceramics topcoat. Recommended for salvage and build up of miss machined parts or worn machine parts.

NiAlMo

Composition: Mo 5.0%, Al 5.5% Ni bal

Recommended for salvage and build up of both machinable and grindable carbon steels. It provides good resistance against wear and particles. It is used for high strength and low shrink coatings.

SYNCO ALCR3 WIRE

It is an Arc spray wire providing very dense coatings and high bonding strength, and used for multipurpose arc spray applications. It can be used as a bonding layer as well as final (single) coating. It is highly corrosion and heat resistant (+1000 Deg C). Coatings can be machined. Tensile Strength 600-800 Mpa and Melting Point 1500 Deg C.

SYNCO S23 WIRE

This is a solid wire used for Arc Spray applications. Coatings are highly wear and corrosion resistant. It produces good anti-frictional properties and is an all purpose stainless steel coating wire. It is finished by wet grinding only. For bearing applications and general wear applications this is a universal spraying wire (bond coating required)

For further information or inquiry, please email us at :

Email : This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Tel : +91- 98290-22258 || 98294-22258 || 9950987987


 


Contact us

Synco Industries Ltd.

  • Add:16A III, Heavy Industrial Area. 
    Jodhpur, Rajasthan - 342 003, India
  • Tel: +91-98290-22258  /  98294-22258  /  9950987987
  • Fax: +91-0291-2742557
  • Email: mail@synco.co.in
You are here: Products & Services Products Metal Spray Guns & Spare Parts Coating Wires